Hose Menders
| Description | Price | |
|---|---|---|
 |
Replace the attachment-end (male) of a 3/4 In. hose with this heavy-duty brass shank
|
$2.45
|
 |
Replace the faucet-end (female) of a 3/4 In. hose with this heavy-duty brass connector
|
$2.45
|
 |
Repair damaged or leaking 3/4 In. hose with this heavy-duty brass hose mender.
|
$2.95
|
 |
The 1" Steel Hose Mender is used for repairing our 1" hose assemblies. Simply cut out the bad section of hose, insert the mender into the loose hose ends, and clamp into place. You will have your hose repaired in minutes! Use our heavy duty 1" hose clamps with this mender. |
$2.33
|
 |
The 1.5" Steel Hose Mender is used for repairing our medium and heavy duty lay-flat discharge hoses. Simply cut out the bad section of hose, insert the mender into the loose hose ends, and clamp into place. You will have your hose repaired in minutes! Use our heavy duty 1.5" hose clamps with this mender. We recommend two clamps on each side of the mender for higher pressures. |
$4.45
|
 |
The 2" Steel Hose Mender is used for repairing our medium and heavy duty lay-flat discharge hoses. Simply cut out the bad section of hose, insert the mender into the loose hose ends, and clamp into place. You will have your hose repaired in minutes! Use our heavy duty 2" hose clamps with this mender. We recommend two clamps on each side of the mender for higher pressures. |
$5.50
|